|Layers on the TV tray|
|Layers from the bottom|
After I got my batting trimmed to the proper shape, I pinned the back piece over it with a little room to spare on the edge. I also folded under any edges that might ravel. I then stitched along the outside edge of the base piece. This insures that I am not going to have fuzz or any issues with the batting at the edge.
After removing all of the pins I rolled the edge of the top piece so that it would form a pocket for the elastic. I then sewed it close to the edge. After threading my elastic through the pocket I sewed up the hole that I had left open for this purpose.
|Sewing the edge|
|Elastic pocket pinned|
|Finished product on the tv tray|