|New Camera Strap|
|The raw strip of gauze|
I wanted to do a very simple strap that would be gender neutral so that I have a strap for my husband to be comfortable using. I had some cotton cheesecloth and I thought that it would work nicely. It is a wonderful light-weight material that is fairly strong. This is not your standard cheesecloth from the grocery store. It is about twice the weight of the grocery store variety.
To begin with, I ripped an eight inch strip from the selvage side of my material. Ripping may sound like it would be problematic, but it actually ensures that the line will be straight. It is pretty easy to do if you start with a small cut at one end.
|Pinned & ready to sew|
After sewing the seam, I made sure that all of the edges were caught in the seam. After pulling all of the pins out of the seam, I rearranged the fabric to lie flat with the seam in the middle.
|Rings sewed into the ends|
In order to attach the strap to the camera and the strap, I use large key rings. I sewed a loop around the key ring folding the rough edge under to get a smooth finish. This keeps the ends from raveling. After this all that you need is to put clips on each of the key rings to attach to the camera body.
I hope that you had fun reading through this. If you are interested in making your own camera strap, I hope that this will help. If you have any questions please feel free to message me or leave a comment. I check my comments frequently and I will do my best to answer any question that you might have.